[HappyG]

I need one.

Who makes one of the better ones? It'll be used for my car AND my truck if that makes a difference.

Let's hear what you got!!
________
Ford Parklane Specifications

[hl0m4n]

all you need: http://www.griotsgarage.com/product/...rrivals&page=1

[wj4]

I have a simple Craftsman from the local Sears, there's a part that twists like a bottle cap that lets you adjust the pressure you want to apply. I only use it to secure the wheels anyway so I don't need to spend $300 for a Snap On one.

[HappyG]

Originally Posted by hl0m4n

all you need: http://www.griotsgarage.com/product/...rrivals&page=1

LoL. That's the one I've been eyeing for the past few months...do you have one?
If so, is it a quality tool?

I've read a lot about snap-on's craftsmen and others, but would like some real owner opinions...thanks for those replies fellas.

Keep'em coming!
________
Scion T2B

[rubber_ducky]

Quite honestly, the torsion beam type from sears will work just fine. Car or truck doesn't matter. What does matter is the measurement range. Naturally, smaller drive sizes (1/4" drive) will have a lower torque range and vice versa.

If you do choose to get a dial-type wrench, make sure it's from a reputable company if only to be sure that they're still in business for whenever you need to send it in to have it recalibrated.

[rubber_ducky]

Originally Posted by hl0m4n

all you need: http://www.griotsgarage.com/product/...rrivals&page=1

The problem with Griots is that they, for the most part, are just resellers who mark up other commonly available products...

CASE IN POINT

[HappyG]

Ahhh, thanks rubber ducky!

I know that Griot's often does that with many of their prodcuts and was looking for the actual maker of their branded torque wrench..you saved me the trouble.

BUT, Griot's does say lifetime free torque re-calibration. Does that make the extra money worth it perhaps? And surely it has to measure more then 99.5 lb/ft ? I think my truck needs aroud 120lb/ft for the lugs...

If the company also offers the re-calibration, then I'll just buy directly.

In your opinion, how accurate are the digital guages? Most things are going digital today, but some things I'm still on the fence on such as tools and guages. Wonder if it's better?
________
Vapor Tower Vaporizer

[par4bmw]

I have replaced half of my jeep and a torque wrench is wise for much of the work. But you certainly do not need a digital one. And for wheels,

[badfish]

Originally Posted by rubber_ducky

The problem with Griots is that they, for the most part, are just resellers who mark up other commonly available products...

CASE IN POINT

Yeah, they stick their name on it and sell it for a high price... great business model, wish I could do that for a living...

[san~man]

Just get a dial type torque wrench from Sears and be done with it. They go on sale every few months for $69.00 for the Craftsman one.

Unless you're a mechanic, I couldn't justify anyone spending the money for a snap on/blue point.

[xspeedy]

I have spent several hours doing research on torque wrenches. For a bit more than what you pay at Sears for perhaps questionable quality, you can get an industrial quality dual-beam design that is superior to traditional micrometer clickers. This model is rebranded as Snap-On, but get it from the OEM (Precision Instruments) for a much lower price. If you check Froogle (or other) for the part number, you can get it for just $110 shipped. Why spend $200+ at Snap-On? The dual-beam setup makes adjustment easier and doesn't require you to set down the torque when storing the unit.

http://www.torqwrench.com/tools/item...kCode=C2FR100F

If you want the fancier Snap-On digital Techwrench, you can typically find it on Ebay for considerably less money than what Snap-On charges.

[red998]

awesome, old thread but very useful
ty
for wheels we need 1/2" drive, no?

[Silver-Bolt]

Hazet

[Sniz]

Originally Posted by xspeedy

I have spent several hours doing research on torque wrenches. For a bit more than what you pay at Sears for perhaps questionable quality, you can get an industrial quality dual-beam design that is superior to traditional micrometer clickers. This model is rebranded as Snap-On, but get it from the OEM (Precision Instruments) for a much lower price. If you check Froogle (or other) for the part number, you can get it for just $110 shipped. Why spend $200+ at Snap-On? The dual-beam setup makes adjustment easier and doesn't require you to set down the torque when storing the unit.

http://www.torqwrench.com/tools/item...kCode=C2FR100F

If you want the fancier Snap-On digital Techwrench, you can typically find it on Ebay for considerably less money than what Snap-On charges.

great post

i love the techwrench, 1st time i used the degrees measuring I was spinning around the garage like a little kid lol

Originally Posted by red998

awesome, old thread but very useful
ty
for wheels we need 1/2" drive, no?

''
yes