[Custom Install]

Having tried lots of products I decided to do some digging and separate the snake oil from the real deal.
This product is absolutely amazing. I tried it on my neighbours two cars that don't see much love (sorry never took before/after pics), both my cars were spotless so I needed a proper benchmark.
All I can say is I'm amazed with the performance of it, shortly after applying the foam started to turn brown and all the road film began to break up. Even the pavement (sidewalk) turned brown. This is a sugar based product without harsh chemicals.
A quick power wash and job done, the cars looked like they had been cleaned with a contact method.
It's not cheap, good products aren't, but if you can get your hands on some I'd love to hear some feedback.
As for me, I'm sold on it. Finally the snake oil is being kept for the snakes and Bilt Hamber touch less for me is 10/10.

https://bilthamber.com/product/touch-less/

[atyl1972]

Yes touch less is the very best in my opinion, only and only when used first, then rinse and then hands on.

[Sparky_12]

Looks Iike it's available in the US via Clean Garage but the instructions to measure the appropriate amount are kinda funny…

Step 1

Fill the detergent bottle or reservoir (on machine or lance) up to capacity with plain water. Turn detergent feed to full. Take a large bucket or container and discharge the lance into this, watching the detergent bottle until empty. Once empty, stop.

Step 2

The following calculations will achieve 4% dilution; Measure the total amount collected and multiply this number by 0.04 (Total can be measured in either volume with a measuring jug or by weight) this is the amount of TOUCH-LESS to use.

Step 3

Add the calculated amount from STEP TWO to the pressure-washer reservoir and top up to full with cold water and shake in for a few moments

[GregM4]

Originally Posted by Sparky_12

Looks Iike it's available in the US via Clean Garage but the instructions to measure the appropriate amount are kinda funny…

Step 1

Fill the detergent bottle or reservoir (on machine or lance) up to capacity with plain water. Turn detergent feed to full. Take a large bucket or container and discharge the lance into this, watching the detergent bottle until empty. Once empty, stop.

Step 2

The following calculations will achieve 4% dilution; Measure the total amount collected and multiply this number by 0.04 (Total can be measured in either volume with a measuring jug or by weight) this is the amount of TOUCH-LESS to use.

Step 3

Add the calculated amount from STEP TWO to the pressure-washer reservoir and top up to full with cold water and shake in for a few moments

What the ....!

[Limegrntaln]

Looks like a winner. Im interested to see where it sits on the Ph scale. I don't want this stripping off my ceramic coating. Forensic Detailing Channel, reviews a lot of Bilt Hamber products. I'll see if he's reviewed it.

Well, actually, he has,