[BlkGS]

Originally Posted by Efthreeoh

Actually it is a backing plate, not a "dust shield", which serves as the mount for parking the brake shoes/hardware for the Hummer's intergral parking brake built into the disk brake rotor. So, if one wants to pass an annual safety inspection, the backing plate is somewhat important. On the 320i, which has rear drum brakes (circa 1976), the backing plate holds the drum brake components.

But you missed the point. Price is not the issue; the GM backing plate is no longer available new from any source/supplier. Used ones are rusted beyond usability.

I could also point to another critical suspension component of the GM Hummer, the front torsion bar spring adjuster. Same issue. NLA. But we're well off topic.

Sounds like a great opportunity for a small machine shop to make those, they don't appear to be particularly complicated. With advancements.in 3d scanning, one could probably get a pretty workable CAD model for a CNC with just a cell phone.

The Hummer had torsion bar front suspension? That's wild, my colorado had struts up front with coil springs. I would have assumed they stuck with that for the Hummers too.

Anyways, back on topic... What about something bonkers like a Shelby cobra replica?

[Alfisti]

There's a lovely Interlagos blue Z4M roadster with 55K miles for basically $20K in the USA. That is a LOT of fun for $20K jesus freaking H.

[neilum]

Buy a Cayman and put a deman 4.5 motor swap in it. You'll be over $100K but I think you can get it done with $120 realistically. They can be swapped into a 2016 Gt4 which are coming into realistic territory for you.

The 4.5 easily puts down 475 wheel horsepower with a massive upgrade in torque and is a genuinely badass car. You can customize the gear ratios, exhaust, clutch to your liking/budget.

Or a 991.1 GT3 are coming down into 100ish territory. I know about the finger followers but there are aftermarket options as well as extended warranties. Both would be a lot of car for the money.

[Bumpinjeep]

How about something completely different.
Wrangler 392 on factory 35s or Bronco Raptor on factory 37s. Or blow your money on a Raptor R?

[Donatello.]

Originally Posted by Bumpinjeep

How about something completely different.
Wrangler 392 on factory 35s or Bronco Raptor on factory 37s. Or blow your money on a Raptor R?

No interest in selling what I have for any of those

[Donatello.]

Originally Posted by neilum

Buy a Cayman and put a deman 4.5 motor swap in it. You'll be over $100K but I think you can get it done with $120 realistically. They can be swapped into a 2016 Gt4 which are coming into realistic territory for you.

The 4.5 easily puts down 475 wheel horsepower with a massive upgrade in torque and is a genuinely badass car. You can customize the gear ratios, exhaust, clutch to your liking/budget.

Or a 991.1 GT3 are coming down into 100ish territory. I know about the finger followers but there are aftermarket options as well as extended warranties. Both would be a lot of car for the money.

I'd love to add a GT3, but not sell my current toys for one at this time

[Alfisti]

Do you own the 30th anniversary Miata?