[Tommyvalentino42]

Hi I have a 2007 e90 325i that now won't start I have no idea what it could be as it was driving and starting up before hand it just died out while reversing out one day and wouldn't kick over from then on I ran the code scanner and it comes up with Codes P0174 confirmed and P0016 confirmed then also has Codes P0301 Pending P0302 Pending and P13B2 Pending I've tried to get it looked at by a mechanic and to put into a shop but can't get luck anywhere and it's now been a few weeks since and need to get it running again for my everyday needs, is anyone able to give me any information or helpful insight on what might be the problem and what's causing this please .

[Hydrostream]

What are those codes?

[DrFerry]

Originally Posted by Tommyvalentino42

Hi I have a 2007 e90 325i that now won't start I have no idea what it could be as it was driving and starting up before hand it just died out while reversing out one day and wouldn't kick over from then on I ran the code scanner and it comes up with Codes P0174 confirmed and P0016 confirmed then also has Codes P0301 Pending P0302 Pending and P13B2 Pending I've tried to get it looked at by a mechanic and to put into a shop but can't get luck anywhere and it's now been a few weeks since and need to get it running again for my everyday needs, is anyone able to give me any information or helpful insight on what might be the problem and what's causing this please .

Potentially a bad crankshaft position sensor which would explain why the engine stopped while backing out.
.
https://www.e90post.com/forums/showthread.php?t=678269
.
https://www.mavyn.com/blog/troublesh...016-error-code
.

[Tommyvalentino42]

Originally Posted by Hydrostream

What are those codes?

DTC -P0174- reads as ("System too lean, bank 2 System Too Lean") And DTC -P0016- reads as ("Crankshaft position/camshaft position, bank 1 sensor A - correlation
Crankshaft Position - Camshaft Position Correlation") I will attach screenshots off the scanned code readings for you,