[liebetrau88]

Well, I designed this one.......



And I shoot this one.......

[Grip Addict]

Originally Posted by adc100

Just be aware that Glock Mags on the 42, 43, 26 do not fall free on ejection. Reason being if you would have a failure whereby the mag is not properly engaged the mag will not free fall and you can then tap and rack.

For me its not a problem. The odds are almost zero you will have to use the firearm as a weapon and double zero that you would need to change out a mag . Its hard to even "imagine" that scenario.

With some practice you can change out pretty quick though.;

Thanks for the info, I actually heard about that.

I heard the Taran +2, +3 mags add some needed weight and they drop easy.

[adc100]

Originally Posted by Grip Addict

Thanks for the info, I actually heard about that.

I heard the Taran +2, +3 mags add some needed weight and they drop easy.

Have my doubts. Mine does not drop with 5 in the mag.

[OlivaresAnthony]

https://www.nraila.org/articles/2019...cond-amendment

For anyone in CA that hasn't heard the wonderful news, time to stock up on magazines!

[KenB925]

Originally Posted by OlivaresAnthony

https://www.nraila.org/articles/2019...cond-amendment

For anyone in CA that hasn't heard the wonderful news, time to stock up on magazines!

I heard, I'm not going to 'un-modify' my mags just yet.

[blau iii]

Another forum I'm on was showing off their EDCs, here's my current set up. I have a g19 for the winter time.

[OlivaresAnthony]

Originally Posted by KenB925

I heard, I'm not going to 'un-modify' my mags just yet.

I converted a couple of my 10/30 mags to standard capacity.
Got a whole bunch of stuff on order too!

[IllSic_Design]

Originally Posted by OlivaresAnthony

I converted a couple of my 10/30 mags to standard capacity.
Got a whole bunch of stuff on order too!

How did you do this? All my 10/30 mags the springs are too short when I remove the extender inside.

[OlivaresAnthony]

Originally Posted by IllSic_Design

How did you do this? All my 10/30 mags the springs are too short when I remove the extender inside.

On my S&W 15-22 magazines, I used a screwdriver and hammer to bend the limiting pin until it came off.

My Hexmag magazines, I bought a full size 30 round spring to replace the short spring and removed the spacer/block that limits it to 10 rounds.

My Lancer mags, I drilled out the rivets.

If your only problem is short springs, order replacement springs for 30 round magazines. I got mine on Brownells.

[IllSic_Design]

Originally Posted by OlivaresAnthony

On my S&W 15-22 magazines, I used a screwdriver and hammer to bend the limiting pin until it came off.

My Hexmag magazines, I bought a full size 30 round spring to replace the short spring and removed the spacer/block that limits it to 10 rounds.

My Lancer mags, I drilled out the rivets.

If your only problem is short springs, order replacement springs for 30 round magazines. I got mine on Brownells.

Ok cool, I have hexmags and have pulled them apart, didn't know if they sold the spring separately.

Edit: Just saw the part at the bottom about getting them at Brownells, thanks!!

[OlivaresAnthony]

Originally Posted by IllSic_Design

Ok cool, I have hexmags and have pulled them apart, didn't know if they sold the spring separately.

Edit: Just saw the part at the bottom about getting them at Brownells, thanks!!

This is the one I bought:
https://www.brownells.com/aspx/searc...6685&pid=41777

[IllSic_Design]

Originally Posted by OlivaresAnthony

This is the one I bought:
https://www.brownells.com/aspx/searc...6685&pid=41777

Thanks man, got some ordered. The only other ones I could find on there were all back ordered so I thought I was S.O.L.

[Rhidium]

Originally Posted by zentanker

I would be so happy to have that.

I was fortunate enough to get one with different barrels (short, normal,and suppressed). It is pretty remarkable how simple the interlocking of the stock and barrels are. Twist of a screw and push of a button you can remove the parts.

Other interesting thing but is that after you install the mgazing you have to wind up a gear winder that spin the magazine as fast as it can go. Only thing stops it from rotaing is the 22LR bullets pressing against the chamber. Can't wait to get it out to the range.

(no idea why the app attaches the photo sideways)

[Grumpy Old Man]

Originally Posted by Rhidium

I was fortunate enough to get one with different barrels (short, normal,and suppressed). It is pretty remarkable how simple the interlocking of the stock and barrels are. Twist of a screw and push of a button you can remove the parts.

Other interesting thing but is that after you install the mgazing you have to wind up a gear winder that spin the magazine as fast as it can go. Only thing stops it from rotaing is the 22LR bullets pressing against the chamber. Can't wait to get it out to the range.

(no idea why the app attaches the photo sideways)

Are you using a Mac. I have found that if I open the photo up and rotate it once completely and then save it oriented the way I want before I upload it seems to solve that problem.

[Rhidium]

Originally Posted by Grumpy Old Man

Are you using a Mac. I have found that if I open the photo up and rotate it once completely and then save it oriented the way I want before I upload it seems to solve that problem.

Originally Posted by Grumpy Old Man

Are you using a Mac. I have found that if I open the photo up and rotate it once completely and then save it oriented the way I want before I upload it seems to solve that problem.

Photo is fine.. It has something to do with bimmer post Android app. It has bugs.

[Grumpy Old Man]

Originally Posted by Rhidium

Photo is fine.. It has something to do with bimmer post Android app. It has bugs.

In the past I've posted pic that were right side up on my computer but loaded sideways. I deleted the post then rotated the photo 360degrees on my computer and reloaded and it worked fine. Maybe the app has a bug but that fix works for me.

[Grumpy Old Man]

FTFY

[Rhidium]

This app sucks.. Totally random what works and what doesn't work.

[Dog Face Pony Soldier]

Originally Posted by liebetrau88

Well, I designed this one.......

[IMG]https://cdn.athlonoutdoors.com/wp-co...nterprises.jpg[/IMG]

And I shoot this one.......

[IMG]https://scontent.ffcm1-2.fna.fbcdn.n...38;oe=5D4454B2[/IMG]

I'm a JP fan so if I ever buy a bolt action it will probably be their chassis.

[Rhidium]

I like shooting fireballs..

[liebetrau88]

Originally Posted by glennQNYC

I'm a JP fan so if I ever buy a bolt action it will probably be their chassis.

I'll admit I'm a bit biased as it was entirely my project, but the chassis is one of the best on the market. I'm a bit salty about the price point they decided to go with as it's a bit higher than intended, but it's still a great system. The hinge on that thing locks up like vault and can be open an closed thousands of times without having any looseness.

[upstatedoc]

probably a long shot but taking a road trip to Maryland this weekend and wondering if any forum members know if pistol grip shotgun legal there? Edit: found this