Portable Water Deionizer

GregM4 · 02-10-2022, 02:49 AM

Quote:

Originally Posted by FISH22

I live on a well, so very hard water, even after being softened. I committed to the CR Spotless unit. Very happy with it. I bought this mainly for my frozen paint as I wanted to avoid touching the paint as much as possible.

The first season using it, I used it for all phases of washing. Burned through the filters in 2 months. So I switched to just using it as a rinse once I replaced the old filters. It works very well. I have not hand dried my G80 in 8 months. Paint still looks new (no spots anywhere).

I bought this and have never looked back. Horrible water where I am , and this works really well. Also always sunny here so washing outside is a pain, but this solved the majority of my issues.

Not cheap but works IMO.

chicagofan00 · 02-14-2022, 12:23 AM

Had the opportunity to use the CR spotless unit today. Holy shit, I wish I would have looked into a system like this years ago. To say this was amazing is an understatement. I now feel like I can fully understand the feeling that people in other parts of the country have when they said they just wash the car and blow dry it and then walk away. While I still dried the car using my Griots towels, this deionizer made it possible to dry the car the car and not have a care in the world that part of it may be sitting in tue sun for too long and would need to be touched up. The fact that I could dry off the entire car then come around with my air compressor and blow dry all the cracks and crevices and then blow dry the wheels and not have a single water slot is amazing. I easily shaved an hour off of my wash and dry time by not having to go back and detail the wheels or parts of the car again due to water slots.

Sorry for rambling but this thing was seriously life changing when it comes to the world of car washing here in Arizona.

Thank you to all who gave their advice and recommendations!

modat · 02-14-2022, 10:04 AM

Quote:

Originally Posted by chicagofan00

Had the opportunity to use the CR spotless unit today. Holy shit, I wish I would have looked into a system like this years ago. To say this was amazing is an understatement. I now feel like I can fully understand the feeling that people in other parts of the country have when they said they just wash the car and blow dry it and then walk away. While I still dried the car using my Griots towels, this deionizer made it possible to dry the car the car and not have a care in the world that part of it may be sitting in tue sun for too long and would need to be touched up. The fact that I could dry off the entire car then come around with my air compressor and blow dry all the cracks and crevices and then blow dry the wheels and not have a single water slot is amazing. I easily shaved an hour off of my wash and dry time by not having to go back and detail the wheels or parts of the car again due to water slots.

Sorry for rambling but this thing was seriously life changing when it comes to the world of car washing here in Arizona.

Thank you to all who gave their advice and recommendations!

Awesome. Glad it worked out for you

element56 · 02-14-2022, 07:27 PM

Picked one up in December, now I just need the car to exit quality control (97 days today) and ship... so maybe APRIL!!!!

LimeRock · 02-15-2022, 06:38 PM

I bought the DC-120 — came yesterday…pumped!

chicagofan00 · 07-30-2022, 08:54 PM

So get this…I was out washing the car this afternoon and everything was going great. The deionizer was working perfectly, reading zero, car wash was coming along nicely, however the water pressure seemed a little lower than usual and there also seemed to be a little bit of air in the water but I didn't think much of it overall. I finished washing the car and turned the water off at the hose bib. I then proceeded to dry off the car and about 30 minutes later I hear a loud BOOM. Scared the shit out of me and I started looking all over to see what the hell just happened. Look over at the deionizer and the one canister had exploded with resin going all over the place!

Now a few things could be a contributing factor here:
- This was only the second time having it hooked up to a hose bib that was coming off of our new carbon filter and water softener system. Not sure if that could be part of the problem or;
- I had also done the RV Mod conversion kit as the OEM setup was having me go through resin like crazy.

Really sucks given that I've put a lot of money not only into the system itself, a set of replacement cartridges that I had used, and then the conversion kit and a bag of resin as well. Close to $800 later and I have a useless system.

Limegrntaln · 07-30-2022, 10:08 PM

Quote:

Originally Posted by chicagofan00

So get this…I was out washing the car this afternoon and everything was going great. The deionizer was working perfectly, reading zero, car wash was coming along nicely, however the water pressure seemed a little lower than usual and there also seemed to be a little bit of air in the water but I didn't think much of it overall. I finished washing the car and turned the water off at the hose bib. I then proceeded to dry off the car and about 30 minutes later I hear a loud BOOM. Scared the shit out of me and I started looking all over to see what the hell just happened. Look over at the deionizer and the one canister had exploded with resin going all over the place!

Now a few things could be a contributing factor here:
- This was only the second time having it hooked up to a hose bib that was coming off of our new carbon filter and water softener system. Not sure if that could be part of the problem or;
- I had also done the RV Mod conversion kit as the OEM setup was having me go through resin like crazy.

Really sucks given that I've put a lot of money not only into the system itself, a set of replacement cartridges that I had used, and then the conversion kit and a bag of resin as well. Close to $800 later and I have a useless system.

Shit, cleanup on aisle 12.

Just cut your losses, at this point, and go with this. Cheaper, and they have a spot in Gilbert.

https://puretecwater.com/deionized-w...-tank-exchange

Wait, where are the cartridges? There supposed to be cartridges.

chicagofan00 · 07-30-2022, 10:32 PM

Quote:

Originally Posted by Limegrntaln

Quote:

Originally Posted by chicagofan00

So get this…I was out washing the car this afternoon and everything was going great. The deionizer was working perfectly, reading zero, car wash was coming along nicely, however the water pressure seemed a little lower than usual and there also seemed to be a little bit of air in the water but I didn't think much of it overall. I finished washing the car and turned the water off at the hose bib. I then proceeded to dry off the car and about 30 minutes later I hear a loud BOOM. Scared the shit out of me and I started looking all over to see what the hell just happened. Look over at the deionizer and the one canister had exploded with resin going all over the place!

Now a few things could be a contributing factor here:
- This was only the second time having it hooked up to a hose bib that was coming off of our new carbon filter and water softener system. Not sure if that could be part of the problem or;
- I had also done the RV Mod conversion kit as the OEM setup was having me go through resin like crazy.

Really sucks given that I've put a lot of money not only into the system itself, a set of replacement cartridges that I had used, and then the conversion kit and a bag of resin as well. Close to $800 later and I have a useless system.

Shit, cleanup on aisle 12.

Just cut your losses, at this point, and go with this. Cheaper, and they have a spot in Gilbert.

https://puretecwater.com/deionized-w...-tank-exchange

Wait, where are the cartridges? There supposed to be cartridges.

Thanks. Will check out that place.

No cartridges as the conversion kit ditches them.

FISH22 · 08-01-2022, 09:47 PM

Holy smokes that's wild! Maybe a silly question.. are you on a well or city water main? Likely some crazy spike in pressure?

chicagofan00 · 08-02-2022, 11:36 AM

Quote:

Originally Posted by FISH22

Holy smokes that's wild! Maybe a silly question.. are you on a well or city water main? Likely some crazy spike in pressure?

City water. No crazy pressure as this was hooked up to the hose bib right after my water softener and the incoming water had been turned off at the hose bib for about 20-30 minutes prior to this exploding so there wouldn't have been a continuous build of pressure…but also don't think there would have been a ton of pressure in there to start with to be sustained and do this kind of damage.

Perhaps the resin is somehow reactive to the salt in the softened water? 🤷🏻 🤔

FISH22 · 08-02-2022, 02:14 PM

Quote:

Originally Posted by chicagofan00

City water. No crazy pressure as this was hooked up to the hose bib right after my water softener and the incoming water had been turned off at the hose bib for about 20-30 minutes prior to this exploding so there wouldn't have been a continuous build of pressure…but also don't think there would have been a ton of pressure in there to start with to be sustained and do this kind of damage.

Perhaps the resin is somehow reactive to the salt in the softened water? 🤷🏻 🤔

Interesting. I have a somewhat similar setup; well pump->softener->charcoal system->CR Spotless. But I have not done this RV mod. I'm guessing this just takes the cartridges out of the picture, so then resin goes direct into the tanks?

chicagofan00 · 08-02-2022, 02:54 PM

Quote:

Originally Posted by FISH22

Quote:

Originally Posted by chicagofan00

City water. No crazy pressure as this was hooked up to the hose bib right after my water softener and the incoming water had been turned off at the hose bib for about 20-30 minutes prior to this exploding so there wouldn't have been a continuous build of pressure…but also don't think there would have been a ton of pressure in there to start with to be sustained and do this kind of damage.

Perhaps the resin is somehow reactive to the salt in the softened water? 🤷🏻 🤔

Interesting. I have a somewhat similar setup; well pump->softener->charcoal system->CR Spotless. But I have not done this RV mod. I'm guessing this just takes the cartridges out of the picture, so then resin goes direct into the tanks?

Yep, exactly. Allows for a lot more resin to be stored in there and this maximizing it.

Probably no way to ever know what the exact cause of this was but it's disappointing nonetheless. Checking out another option now where a company delivers deionizer tanks to the house and then swaps them out as needed. Small deposit required (refundable when done with the program) and a small monthly rental fee. Seems way more cost effective from what I've seen.

BMWM4CX · 08-02-2022, 03:40 PM

Quote:

Originally Posted by chicagofan00

Quote:

Originally Posted by FISH22

Quote:

Originally Posted by chicagofan00

City water. No crazy pressure as this was hooked up to the hose bib right after my water softener and the incoming water had been turned off at the hose bib for about 20-30 minutes prior to this exploding so there wouldn't have been a continuous build of pressure…but also don't think there would have been a ton of pressure in there to start with to be sustained and do this kind of damage.

Perhaps the resin is somehow reactive to the salt in the softened water? 🤷🏻 🤔

Interesting. I have a somewhat similar setup; well pump->softener->charcoal system->CR Spotless. But I have not done this RV mod. I'm guessing this just takes the cartridges out of the picture, so then resin goes direct into the tanks?

Yep, exactly. Allows for a lot more resin to be stored in there and this maximizing it.

Probably no way to ever know what the exact cause of this was but it's disappointing nonetheless. Checking out another option now where a company delivers deionizer tanks to the house and then swaps them out as needed. Small deposit required (refundable when done with the program) and a small monthly rental fee. Seems way more cost effective from what I've seen.

Possibly a dumb question but I mean no harm…did you possibly overfill the resin in the tank?

chicagofan00 · 08-02-2022, 06:22 PM

Quote:

Originally Posted by BMWM4CX

Quote:

Originally Posted by chicagofan00

Quote:

Originally Posted by FISH22

Quote:

Originally Posted by chicagofan00

City water. No crazy pressure as this was hooked up to the hose bib right after my water softener and the incoming water had been turned off at the hose bib for about 20-30 minutes prior to this exploding so there wouldn't have been a continuous build of pressure…but also don't think there would have been a ton of pressure in there to start with to be sustained and do this kind of damage.

Perhaps the resin is somehow reactive to the salt in the softened water? 🤷🏻 🤔

Interesting. I have a somewhat similar setup; well pump->softener->charcoal system->CR Spotless. But I have not done this RV mod. I'm guessing this just takes the cartridges out of the picture, so then resin goes direct into the tanks?

Yep, exactly. Allows for a lot more resin to be stored in there and this maximizing it.

Probably no way to ever know what the exact cause of this was but it's disappointing nonetheless. Checking out another option now where a company delivers deionizer tanks to the house and then swaps them out as needed. Small deposit required (refundable when done with the program) and a small monthly rental fee. Seems way more cost effective from what I've seen.

Possibly a dumb question but I mean no harm…did you possibly overfill the resin in the tank?

No. In fact when I put the new resin in earlier in the day I ran out and couldn't fill both sides to the respective level. The one canister was at the right level, 2 inches below the top per the conversion kit instructions, and the other canister was about 4 inches below the top.

MBoriPerf · 08-17-2022, 11:45 AM

I BELIEVE (not sure of this and cant confirm) Griots and Adams units are the same as On The Go systems:
https://www.portablewatersoftener.com/

fl1by · 08-26-2022, 08:11 PM

Quote:

Originally Posted by modat

CR spotless is probably the industry standard. Pricey but well worth it

02-14-2022, 12:23 AM	#24
chicagofan00 Major General 20318 Rep 8,349 Posts Drives: 2024 X5 M60i Join Date: Feb 2011 Location: Phoenix iTrader: (1) Garage List 2024 BMW X5 M60i [9.80]	Had the opportunity to use the CR spotless unit today. Holy shit, I wish I would have looked into a system like this years ago. To say this was amazing is an understatement. I now feel like I can fully understand the feeling that people in other parts of the country have when they said they just wash the car and blow dry it and then walk away. While I still dried the car using my Griots towels, this deionizer made it possible to dry the car the car and not have a care in the world that part of it may be sitting in tue sun for too long and would need to be touched up. The fact that I could dry off the entire car then come around with my air compressor and blow dry all the cracks and crevices and then blow dry the wheels and not have a single water slot is amazing. I easily shaved an hour off of my wash and dry time by not having to go back and detail the wheels or parts of the car again due to water slots. Sorry for rambling but this thing was seriously life changing when it comes to the world of car washing here in Arizona. Thank you to all who gave their advice and recommendations! Attached Images __________________ Instagram: @Phxrisingphotography Current - 2024 G05 X5 ///M60i in Java Green Past - 2005 E53 X5 3.0i in Titanium Silver; 2008 E92 335i in Montego Blue; 2019 G01 X3 M40i in Glacier Silver; 2022 G80 M3 Competition in Twilight Purple
	Appreciate 6 FISH225504.50 M2 CCO1333.50 BIGW0RM4154.00 T0RM3NT4605.50 SetAlias228.50 snareman10310.50 Quote

02-14-2022, 07:27 PM	#26
element56 Lieutenant 1105 Rep 400 Posts Drives: 16 X3 '22 M4XC '23 X3M40i Join Date: Aug 2021 Location: Vancouver, WA iTrader: (0)	Picked one up in December, now I just need the car to exit quality control (97 days today) and ship... so maybe APRIL!!!!
	Appreciate 1 chicagofan0020318.00 Quote

02-15-2022, 06:38 PM	#27
LimeRock Lieutenant 677 Rep 405 Posts Drives: BMW & Porsche Join Date: Dec 2020 Location: Windy City iTrader: (0)	I bought the DC-120 — came yesterday…pumped! __________________ Current: G87 M2 on deposit, 992 Carrera T incoming Past: 997.2 911 Carrera S, Macan Turbo, G80 M3 Competition, X3M Competition, OG M2, MK6 GTI
	Appreciate 1 chicagofan0020318.00 Quote

07-30-2022, 08:54 PM	#28
chicagofan00 Major General 20318 Rep 8,349 Posts Drives: 2024 X5 M60i Join Date: Feb 2011 Location: Phoenix iTrader: (1) Garage List 2024 BMW X5 M60i [9.80]	So get this…I was out washing the car this afternoon and everything was going great. The deionizer was working perfectly, reading zero, car wash was coming along nicely, however the water pressure seemed a little lower than usual and there also seemed to be a little bit of air in the water but I didn't think much of it overall. I finished washing the car and turned the water off at the hose bib. I then proceeded to dry off the car and about 30 minutes later I hear a loud BOOM. Scared the shit out of me and I started looking all over to see what the hell just happened. Look over at the deionizer and the one canister had exploded with resin going all over the place! Now a few things could be a contributing factor here: - This was only the second time having it hooked up to a hose bib that was coming off of our new carbon filter and water softener system. Not sure if that could be part of the problem or; - I had also done the RV Mod conversion kit as the OEM setup was having me go through resin like crazy. Really sucks given that I've put a lot of money not only into the system itself, a set of replacement cartridges that I had used, and then the conversion kit and a bag of resin as well. Close to $800 later and I have a useless system. Attached Images __________________ Instagram: @Phxrisingphotography Current - 2024 G05 X5 ///M60i in Java Green Past - 2005 E53 X5 3.0i in Titanium Silver; 2008 E92 335i in Montego Blue; 2019 G01 X3 M40i in Glacier Silver; 2022 G80 M3 Competition in Twilight Purple
	Appreciate 2 Limegrntaln14249.50 M4Tejas1060.00 Quote

08-01-2022, 09:47 PM	#31
FISH22 Colonel 5505 Rep 2,034 Posts Drives: G80 M3 Competition Join Date: Apr 2012 Location: Chesapeake, VA iTrader: (2) Garage List 2021 BMW M3C [10.00] 2011 BMW M3 [10.00]	Holy smokes that's wild! Maybe a silly question.. are you on a well or city water main? Likely some crazy spike in pressure?
	Appreciate 0 Quote

08-17-2022, 11:45 AM	#37
MBoriPerf Private First Class 62 Rep 170 Posts Drives: 2019 Audi Q5 Join Date: Jul 2022 Location: North Carolina iTrader: (0)	I BELIEVE (not sure of this and cant confirm) Griots and Adams units are the same as On The Go systems: https://www.portablewatersoftener.com/
	Appreciate 1 chicagofan0020318.00 Quote