C2KMotorsports Supra Build Thread (6/8 Re-assembly has begun!)

P1 · 11-25-2018, 09:13 PM

Paint looks to be in really good condition given the age of the vehicle.

Curt2000 · 11-29-2018, 07:50 PM

Quote:

Originally Posted by lsturbointeg

LOVE THE BUILD!! what kind of wheels do you plan on getting if you are changing them?

Quote:

Originally Posted by lsturbointeg

LOVE THE BUILD!! what kind of wheels do you plan on getting if you are changing them?

HRE C305s are in production!

lsturbointeg · 11-29-2018, 11:04 PM

Quote:

Originally Posted by Curt2000

HRE C305s are in production!

Oh sweet!

Red Bread · 11-30-2018, 12:14 PM

Great wheel choice, looking forward to seeing them.

Curt2000 · 12-02-2018, 11:48 AM

Rear Wiper Delete

Spent a little time this weekend performing a rear wiper delete. The rear wiper has been temperamental ever since I bought the car, getting stuck mid swipe or not working at all. So I decided to go ahead and remove it all together! I picked up a generic delete kit from a company called ZSpec for about $25, pretty sure you can get them for cheaper through eBay or Amazon but they had a fitment guide that listed the Supra so I decided to pay a little extra for that reassurance.

The process is pretty simple, the cover at the base of the wiper pops off, 10mm nut holding the wiper to the spline, remove the wiper, then there is a large hex nut that an adjustable wrench can easily remove, take it off then prop the hatch open. The trim piece on the rear hatch simply pops off, I carefully pried it off to ensure I didn’t break any of those precious tabs. Once the trim is removed its just three 10mm nuts holding the wiper assembly in place. IT takes some finagling but it comes out, it’s stuck in place by some silicone sealant. There is a spacer piece that needs to be popped off as well from the topside that is also just held in place by sealant. Once it’s all off, the delete plug goes in very intuitively and pop the trim piece back in place. Very easy mod and looks great once complete, plus you save about 2 pounds out of your rear hatch, I’ve noticed my hatch struts actually keep the hatch open now with out needing to be propped up, bonus!

Curt2000 · 12-06-2018, 08:09 PM

Quote:

Originally Posted by Alfisti

Great work but the front end is way too low.

How about now?

PYE46M3 · 12-06-2018, 08:52 PM

ask any racer, any real racer
it doesn't matter if it runs 12's, 11's or 10's
if it doesnt have a TRD wing, its not a supra

NickyC · 12-06-2018, 11:23 PM

That car is screaming for a FMIC. Please get on that stat. ;P

Alfisti · 12-07-2018, 11:03 AM

Front end height is 100% better.

TBH I'd keep the wheels in storage but would get her a set of modern sporty wheels, nothing uber extreme but just freshen her up.

MOBF10 · 12-07-2018, 11:17 AM

diggin it

Curt2000 · 12-10-2018, 09:08 PM

Cleaned up some of those garage shots with lightroom!

Curt2000 · 12-10-2018, 09:10 PM

Quote:

Originally Posted by roastbeef

thats pretty cool man, i always loved those growing up. this car has aged well.

It really has, with some refresh mods she will be good as new too!

Quote:

Originally Posted by Red Bread

I'd advise against film if you want clarity and swirl free. But then I've kept Jet Black and Sapphire Black swirl free for years.

Going to get her polished then do a stealth PPF from XPEL!

Quote:

Originally Posted by R N M

Supra looks so good.
Stock with a drop is perfect!

Those HREs will be here tomorrow tho

lsturbointeg · 12-10-2018, 09:14 PM

Quote:

Originally Posted by Curt2000

Those HREs will be here tomorrow tho

///M ARMY · 12-10-2018, 09:27 PM

this is gonna look killer. Keep it up. Always a good classic.

Curt2000 · 12-15-2018, 09:18 PM

The wait is finally over! My custom HREs have finally arrived! Fedex Delivered them on Tuesday, I got the notification, left work immediately, threw them in the wife’s SUV along with my Michelin PS4Ss and drove straight to the tire shop for mounting. I was able to get them home just in time to test mount and take some quick shots. I will have to adjust the KWs up a little since the fronts are barely contacting the fender liner screw but overall fitment is perfect!

As an added bonus, HRE sent me shots of my wheels as they were going through production, be on the look out for a separate thread for that photo journal.

pukicabuki · 12-16-2018, 12:15 AM

Looks great!

0-60Motorsports · 12-16-2018, 08:32 AM

Wow they look stunning. Excellent choice.

Curt2000 · 12-16-2018, 12:17 PM

Check out my write-up on XPEL tint HERE

Alfisti · 12-17-2018, 09:28 AM

Perfect wheels, not too big, the white works, just awesome. WELL PLAYED.

x3sm · 12-17-2018, 09:46 AM

Sweet car! Have you thought about spoiler delete?

Alfisti · 12-17-2018, 11:31 AM

Holy shit wheels are $1200+ EACH, minimum, damn that's expensive.

Red Bread · 12-17-2018, 12:39 PM

Quote:

Originally Posted by Alfisti

Holy shit wheels are $1200+ EACH, minimum, damn that's expensive.

Not really, at least when comparing to other three piece wheels with proper fitment. Plus, like you said, they just look right on there. Well played indeed.

11-25-2018, 09:13 PM	#45
P1 Lieutenant General 11735 Rep 11,191 Posts Drives: 2004 3/4 ton Duramax Join Date: Aug 2007 Location: United States iTrader: (1)	Paint looks to be in really good condition given the age of the vehicle.
	Appreciate 1 Curt20001034.50 Quote

11-30-2018, 12:14 PM	#48
Red Bread Major General 4458 Rep 9,160 Posts Drives: Smog machines Join Date: Oct 2008 Location: Austin, TX iTrader: (0)	Great wheel choice, looking forward to seeing them.
	Appreciate 1 Curt20001034.50 Quote

12-02-2018, 11:48 AM	#49
Curt2000 Brigadier General 1035 Rep 3,159 Posts Drives: '10 E93 M3 Join Date: Jun 2007 Location: KY iTrader: (25)	Rear Wiper Delete Spent a little time this weekend performing a rear wiper delete. The rear wiper has been temperamental ever since I bought the car, getting stuck mid swipe or not working at all. So I decided to go ahead and remove it all together! I picked up a generic delete kit from a company called ZSpec for about $25, pretty sure you can get them for cheaper through eBay or Amazon but they had a fitment guide that listed the Supra so I decided to pay a little extra for that reassurance. The process is pretty simple, the cover at the base of the wiper pops off, 10mm nut holding the wiper to the spline, remove the wiper, then there is a large hex nut that an adjustable wrench can easily remove, take it off then prop the hatch open. The trim piece on the rear hatch simply pops off, I carefully pried it off to ensure I didn’t break any of those precious tabs. Once the trim is removed its just three 10mm nuts holding the wiper assembly in place. IT takes some finagling but it comes out, it’s stuck in place by some silicone sealant. There is a spacer piece that needs to be popped off as well from the topside that is also just held in place by sealant. Once it’s all off, the delete plug goes in very intuitively and pop the trim piece back in place. Very easy mod and looks great once complete, plus you save about 2 pounds out of your rear hatch, I’ve noticed my hatch struts actually keep the hatch open now with out needing to be propped up, bonus! __________________ Former Car: '16 SUNBURST GOLD F80 ///M3--6MT/Carbon Cloth (ED Thread) Former Car:'13 SANTORINI BLUE E92///M3--6MT/Speed Cloth/ZCP(ED Thread) INSTAGRAM:@C2KMotorsports
	Appreciate 2 0-60Motorsports876.00 Ickdeep5731.00 Quote

12-06-2018, 08:52 PM	#51
PYE46M3 Captain 865 Rep 658 Posts Drives: E46 M3, E92 M3 Join Date: Nov 2018 Location: CA iTrader: (0)	ask any racer, any real racer it doesn't matter if it runs 12's, 11's or 10's if it doesnt have a TRD wing, its not a supra
	Appreciate 1 Curt20001034.50 Quote

12-06-2018, 11:23 PM	#52
NickyC Lieutenant General 19305 Rep 11,212 Posts Drives: M4 CS. Former G82, x2 F82, F80 Join Date: Nov 2010 Location: Jacked out of my mind iTrader: (23)	That car is screaming for a FMIC. Please get on that stat. ;P
	Appreciate 2 thasuperdude104.00 Curt20001034.50 Quote

12-07-2018, 11:03 AM	#53
Alfisti Brigadier General 6965 Rep 3,288 Posts Drives: 2008 Saab 9-3 Combi Join Date: Nov 2014 Location: Toronto, Canada iTrader: (0)	Front end height is 100% better. TBH I'd keep the wheels in storage but would get her a set of modern sporty wheels, nothing uber extreme but just freshen her up.
	Appreciate 1 Curt20001034.50 Quote

12-07-2018, 11:17 AM	#54
MOBF10 Captain 183 Rep 624 Posts Drives: 2018 M3 Comp Join Date: May 2018 Location: Socal iTrader: (1)	diggin it
	Appreciate 1 Curt20001034.50 Quote

12-10-2018, 09:08 PM	#55
Curt2000 Brigadier General 1035 Rep 3,159 Posts Drives: '10 E93 M3 Join Date: Jun 2007 Location: KY iTrader: (25)	Cleaned up some of those garage shots with lightroom! __________________ Former Car: '16 SUNBURST GOLD F80 ///M3--6MT/Carbon Cloth (ED Thread) Former Car:'13 SANTORINI BLUE E92///M3--6MT/Speed Cloth/ZCP(ED Thread) INSTAGRAM:@C2KMotorsports
	Appreciate 0 Quote

12-10-2018, 09:27 PM	#58
///M ARMY Brigadier General 1005 Rep 3,046 Posts Drives: F90 Join Date: Jul 2012 Location: Cali iTrader: (2)	this is gonna look killer. Keep it up. Always a good classic. __________________ 2022 RAM TRX 2021 Ford Bronco 2022 BMW M3
	Appreciate 1 Curt20001034.50 Quote

12-15-2018, 09:18 PM	#59
Curt2000 Brigadier General 1035 Rep 3,159 Posts Drives: '10 E93 M3 Join Date: Jun 2007 Location: KY iTrader: (25)	The wait is finally over! My custom HREs have finally arrived! Fedex Delivered them on Tuesday, I got the notification, left work immediately, threw them in the wife’s SUV along with my Michelin PS4Ss and drove straight to the tire shop for mounting. I was able to get them home just in time to test mount and take some quick shots. I will have to adjust the KWs up a little since the fronts are barely contacting the fender liner screw but overall fitment is perfect! As an added bonus, HRE sent me shots of my wheels as they were going through production, be on the look out for a separate thread for that photo journal. __________________ Former Car: '16 SUNBURST GOLD F80 ///M3--6MT/Carbon Cloth (ED Thread) Former Car:'13 SANTORINI BLUE E92///M3--6MT/Speed Cloth/ZCP(ED Thread) INSTAGRAM:@C2KMotorsports
	Appreciate 7 Red Bread4458.00 roastbeef11713.00 0-60Motorsports876.00 aaaaah361.50 ItsGary1457.00 HRE_Wheels2132.00 DrFerry6995.00 Quote

12-16-2018, 12:15 AM	#60
pukicabuki Lieutenant 176 Rep 528 Posts Drives: something with 4 wheels Join Date: Jun 2011 Location: Oregon iTrader: (0)	Looks great! __________________ '14 SQ5 '13 Land Cruiser '94 TT Supra Hardtop
	Appreciate 1 Curt20001034.50 Quote

12-16-2018, 08:32 AM	#61
0-60Motorsports Brigadier General 876 Rep 3,217 Posts Drives: BMW M3 JB 04 Coupe Join Date: Aug 2007 Location: Kingdom of Bahrain iTrader: (1)	Wow they look stunning. Excellent choice. __________________ Current Mods: 2004 E46 M3cs JB/CSL 2010 E70 X5M AW/BLACK 2011 VW Golf R DSG White/Black IG: @060Motorsports
	Appreciate 1 Curt20001034.50 Quote

12-16-2018, 12:17 PM	#62
Curt2000 Brigadier General 1035 Rep 3,159 Posts Drives: '10 E93 M3 Join Date: Jun 2007 Location: KY iTrader: (25)	Check out my write-up on XPEL tint HERE __________________ Former Car: '16 SUNBURST GOLD F80 ///M3--6MT/Carbon Cloth (ED Thread) Former Car:'13 SANTORINI BLUE E92///M3--6MT/Speed Cloth/ZCP(ED Thread) INSTAGRAM:@C2KMotorsports
	Appreciate 1 0-60Motorsports876.00 Quote

12-17-2018, 09:28 AM	#63
Alfisti Brigadier General 6965 Rep 3,288 Posts Drives: 2008 Saab 9-3 Combi Join Date: Nov 2014 Location: Toronto, Canada iTrader: (0)	Perfect wheels, not too big, the white works, just awesome. WELL PLAYED.
	Appreciate 1 Curt20001034.50 Quote

12-17-2018, 09:46 AM	#64
x3sm Captain 308 Rep 756 Posts Drives: M3 E93 Porsche Join Date: May 2018 Location: Ashville iTrader: (0)	Sweet car! Have you thought about spoiler delete? __________________ M3 E93 PORSCHE MACAN S: SOLD BMW X3 F25: SOLD AUDI S4: SOLD BMW E92 335: SOLD
	Appreciate 1 Curt20001034.50 Quote

12-17-2018, 11:31 AM	#65
Alfisti Brigadier General 6965 Rep 3,288 Posts Drives: 2008 Saab 9-3 Combi Join Date: Nov 2014 Location: Toronto, Canada iTrader: (0)	Holy shit wheels are $1200+ EACH, minimum, damn that's expensive.
	Appreciate 1 Curt20001034.50 Quote