Need help...again.

hks786 · 01-03-2008, 02:20 PM

I'll keep it short. I was playing a game and walked out the room. When I came back there was a burning smell and my screen had no signal. The CPU fan and powersupply fan wasnt working either yet the case light was still on.

Now when I try to power the computer the cpu fan gives a little movement but stops immediately. The power light remains on but that's it. The powersupply fan doesnt go on either.

Any ideas? If it's just the cpu fan could someone tell me how to remove it? I know it has clips but I havent seen clips like it before and there isnt even a model number on the fan.

Crimson92 · 01-03-2008, 03:08 PM

i think this happend to me once the power supply was dead

hks786 · 01-03-2008, 03:17 PM

Quote:

Originally Posted by Crimson92

i think this happend to me once the power supply was dead

Hmm, is there any way to be sure? I think you might be right. I recently added a graphics card which is connected to the powersupply unit. Maybe it caused this to happen, but how do I check?

Crimson92 · 01-03-2008, 03:40 PM

i would just go to frys pick up a new one....if thats not the prob return it....trial and error are my best solutions...

i think the computer would still pass the bios even if the fan was dead

UncleWede · 01-03-2008, 03:57 PM

Sniff around in the case and see which one is burned up, the power supply or the CPU fan. It's usually pretty obvious if there is a burning smell in the room.

FirstClass · 01-03-2008, 05:41 PM

Adding components to a stock power supply is a bad idea in most cases as the manufacturer sticks in the shittiest PSU that will run what they have in the machine.

hks786 · 01-08-2008, 02:27 PM

Quote:

Originally Posted by FirstClass

Adding components to a stock power supply is a bad idea in most cases as the manufacturer sticks in the shittiest PSU that will run what they have in the machine.

I thought it would be fine since there are a few spare cables coming from the PSU? I decided to use the one that fitted the graphics card. Hmm. If my PSU needs replaced why does the powe light come on?

its ray den · 01-08-2008, 02:34 PM

it might be drawing just enough power to turn the lights on, but not enough to power the rest of the system. i agree with every one else's assessment - it seems like a PSU problem. i would go get one with better amperage.

i had the same issue when my PSU died. the indicator lights on the motherboard were on, but nothing else was. i ended up RMA'ing the motherboard and the processor before i decided to RMA the PSU. learn from my experience, change the PSU :P

hks786 · 01-08-2008, 02:36 PM

I thought of that too but wasnt sure. Seems logical. Thanks people

MadDog · 01-08-2008, 02:37 PM

Quote:

Originally Posted by hks786

I thought it would be fine since there are a few spare cables coming from the PSU? I decided to use the one that fitted the graphics card. Hmm. If my PSU needs replaced why does the powe light come on?

Your PSU puts out more than one voltage (+5V, +3.3V, +12V). One (or more) voltages is dead. It doesn't seem that your Power light is affected.

What wattage is the PSU ??

hks786 · 01-08-2008, 02:46 PM

Wattage is 350W

MadDog · 01-08-2008, 03:58 PM

Quote:

Originally Posted by hks786

Wattage is 350W

That doesn't seem too low, but may depend on what you have in your system.

A few months ago, my PC started randomly rebooting, and I found, through the MB BIOS, that one of the voltages was low. Once I replaced the PSU, it's been rock solid ever since.

Good Luck.

01-03-2008, 02:20 PM	#1
hks786 Major General 2276 Rep 5,364 Posts Drives: * Join Date: Mar 2006 Location: UK iTrader: (0)	Need help...again. I'll keep it short. I was playing a game and walked out the room. When I came back there was a burning smell and my screen had no signal. The CPU fan and powersupply fan wasnt working either yet the case light was still on. Now when I try to power the computer the cpu fan gives a little movement but stops immediately. The power light remains on but that's it. The powersupply fan doesnt go on either. Any ideas? If it's just the cpu fan could someone tell me how to remove it? I know it has clips but I havent seen clips like it before and there isnt even a model number on the fan. __________________
	Appreciate 0 Tweet Quote

01-03-2008, 03:57 PM	#5
UncleWede Long Time Admirer, First Time Owner 18454 Rep 9,428 Posts Drives: G01 X3 M40i Dark Graphite Join Date: Jun 2005 Location: Oxnard, CA iTrader: (0)	Sniff around in the case and see which one is burned up, the power supply or the CPU fan. It's usually pretty obvious if there is a burning smell in the room.
	Appreciate 0 Quote

01-08-2008, 02:34 PM	#8
its ray den Second Lieutenant 4 Rep 205 Posts Drives: 2004 Mazda6s Join Date: Aug 2007 Location: NY iTrader: (0)	it might be drawing just enough power to turn the lights on, but not enough to power the rest of the system. i agree with every one else's assessment - it seems like a PSU problem. i would go get one with better amperage. i had the same issue when my PSU died. the indicator lights on the motherboard were on, but nothing else was. i ended up RMA'ing the motherboard and the processor before i decided to RMA the PSU. learn from my experience, change the PSU :P
	Appreciate 0 Quote

01-08-2008, 02:36 PM	#9
hks786 Major General 2276 Rep 5,364 Posts Drives: * Join Date: Mar 2006 Location: UK iTrader: (0)	I thought of that too but wasnt sure. Seems logical. Thanks people __________________
	Appreciate 0 Quote

01-08-2008, 02:46 PM	#11
hks786 Major General 2276 Rep 5,364 Posts Drives: * Join Date: Mar 2006 Location: UK iTrader: (0)	Wattage is 350W __________________
	Appreciate 0 Quote