[prozaczek]

I have problem with Winkpf expert mode.
In comfort mode everythking work very well, but when i use expert mode i have erros like in screens.
I must flash map without afs in dsc60, but i have errors. When i try flash dsc with maps dsca60 in conform mode everythinkg work
Can you help me where is the problem? I do everythink like in instructions:
https://www.car-auto-repair.com/winkfp-e...iguration/
I use K+dcan, everything is set up correctly, ista inpa etc ncsexpert works and executes all commands.
What have i already done to remove afs:
1.I removed $217 from VO/FA and coded default KOMBI, SGM, SZL
2.Remove A/S Fuse #4–>40amp
3.I disconnected the afs module from car
4. I excluded errors from afs from the engine map
The only thing left for me is to replace the map in the dsc module. I tried all numbers 6769705 6768908 6768648
every time I press expert mode, errors like in the attachment pop up.

Of course I copied the files to develop supplementing Coap.ini with the map number and I have the same error all the time. I also changed the winkpf configuration in the options as in the manual.
What is wrong?
Thank you for every possible help